Universal 5-Gallon Spill Kit #SPKU-5 – Absorbs up to 5.2 Gallons
Be prepared for fast response with a Universal Spill Kit!
• Quick Response is Key: Spills happen no matter how hard you try to avoid them. Forklifts knock over drums, tanks are punctured and transporters leak and drip. It is important to have the right sorbents on-hand when these spills occur to eliminate
the slip-and-fall hazard. A quick response is the first order of business — and your best weapon — in the fight against spills. Spill Kits are packed with quality products to help you clean up fast and comply with regulations.
• The Sorbents You Need Are All Inside: Includes a variety of sorbents to handle spills of oils, coolants, solvents or water; prepacked in a UN- and DOT-approved 5-Gallon container. Selfcontained Kit stores sorbent products for easy access as needed for spill control; saves time when quick response is necessary. Screw-top lid with gasket and built-in torque handle provides sealed and secure closure to protect sorbents from moisture, dirt and damage. Rust- and corrosion-free 100% polyethylene is durable to withstand rough handling.
SPKU-5 Specifications
Dimensions: ext. dia. 12″ x 16.75″ H
Shipping Dimensions: 13.4″ W x 13.4″ L x 17.25″ H
Sold as: 1 per package
Absorbency: Up to 5.2 gal. per package
Weight: 11.05 lbs.
# per Pallet: 24
Incinerable: No
Ship Class: 175
Includes:
10 – 15″ x 19″ Gray Universal HeavyWeight SonicBonded Pads (GPB100H)
2 – 3″ x 4′ Gray Universal Sorbent Socks (GCSO430)
2 – 18″ X 30″ Yellow Disposal Bag & Tie (A-DISPBAG-SM)
1 – Pair Nitrile Gloves (A-GLV-NIT)
1 – Safety Goggles (A-GOG)
1 – 3″ x 5″ Vinyl Spill Kit Label (AKITLABEL)
1 – 12″ x 16.75″ White 5-Gallon OverPack (1H2/Y1.5/30) (A5OVER)
6 – 6″ x 2″ TamperProof Seals (ASEAL)
Metric Equivalent Specifications
Dimensions: ext. dia. 30.5cm x 42.5cm H
Shipping Dimensions: 34cm W x 34cm L x 43.8cm H
Absorbency: Up to 19.7 L per package
Weight: 5 kg
Warnings & Restrictions:
There are no known warnings and restrictions for this product.
Regulations and Compliance:
49 CFR 173.3(c)(1) – If a container of hazardous waste is damaged or leaking, it can be placed in a compatible salvage drum that meets UN criteria for shipping
40 CFR 263.31 – Transporters, “must clean up any hazardous waste discharge that occurs during transportation…so that the hazardous waste discharge no longer presents a hazard to human health or the environment.”
40 CFR 263.30(a) – In the event of a spill, transporters must, “take appropriate immediate action to protect human health and the environment.”
29 CFR 1910.1450(e) – OSHA requires containment and cleanup materials for spills in laboratories to reduce occupational exposure to hazardous chemicals.
29 CFR 1910.120(j)(1) – Under an OSHA requirement, “DOT-specified salvage drums or containers and suitable quantities of proper absorbents shall be kept available and used in areas where spills, leaks, or ruptures may occur.”
