Oil-Only Responder™ King Pads #WPK50H – 30″ x 30″, 50 pads/package
• Economical MeltBlown mat for effective oil response
• Best performing pad on water due to fast-wicking fibers
• Highly absorbent MeltBlown polypropylene mat repels water and soaks up only oil and oil-based fluids
• Floats even when completely saturated — most effective for
marine spills
• Bright white color makes it easy to locate in spill emergencies
• Won’t fall apart even when fully saturated
WPK50H Specifications
Dimensions: 30″ W x 30″ L
Shipping Dimensions: 16″ W x 30″ L x 16″ H
Sold as: 50 pads per package
Color: White
Composition: Polypropylene
Absorbency: Up to 52.8 gal. per package
Absorbency per: Up to 1.06 gal. per pad
Weight: 20.5 lbs.
# per Pallet: 15
Basis Weight: HeavyWeight
Incinerable: Yes
Ship Class: 175
Metric Equivalent Specifications
Dimensions: 76.2cm W x 76.2cm L
Shipping Dimensions: 40.6cm W x 76.2cm L x 40.6cm H
Absorbency: Up to 199.8 L per package
Absorbency per: Up to 4 L per pad
Weight: 9.3 kg
Warnings & Restrictions:
There are no known warnings and restrictions for this product.
Regulations and Compliance:
49 CFR 173.3(c)(2) – The area between a container and a salvage drum used for overpacking must have “sufficient cushioning and
absorption material to prevent excessive movement of the damaged package and to eliminate the presence of any free liquid at the
time the salvage drum is closed.”
40 CFR 263.31 – Transporters, “must clean up any hazardous waste discharge that occurs during transportation…so that the hazardous waste discharge no longer presents a hazard to human health or the environment.”
40 CFR 263.30(a) – In the event of a spill, transporters must, “take appropriate immediate action to protect human health and the
environment.”
29 CFR 1910.22(a)(2) – Floors in your workplace should be, “maintained in a clean and, so far as possible, a dry condition.”
29 CFR 1910.1450(e) – OSHA requires containment and cleanup materials for spills in laboratories to reduce occupational exposure
to hazardous chemicals.
29 CFR 1910.120(j)(1) – Under an OSHA requirement, “DOT-specified salvage drums or containers and suitable quantities of proper absorbents shall be kept available and used in areas where spills, leaks, or ruptures may occur.”
